Before moving ahead in this article, first of all, you
need to know about the briquette machine. Generally, a briquettingpress machine is utilized to convert the waste material into a
regular shaped briquette block that can be used as a fuel, which can assist to get
better the conditions of that powder, storage, make them simple for
transportation etc. The briquette system can deal with all types of materials with
suitable moisture and size. Besides, there are multiple types of briquette
machines with dissimilar working principles that are discussed below:
To press the raw material the screw type briquette
machine uses the auger; it can be prepared with or without the heating system
to output briquettes with different materials. The heating structure is
particularly designed for those workers who deal with materials includes lignin
that always originated from biomass. So the heating system is typically
utilized for biomass briquetting. When briquetting gets with the screw-type
briquette machine, then binders are always required. The appropriate material
is fed to the hopper and after that conveyed by the screw inside the briquette
machine. The rotating screw takes the material from the feed port and
compressed it aligned with a die which helps to increase the pressure of a
grade along the screw. Prepare with a heating system will assist the biomass
material to melt the inner lignin and turn it into a high-performance binder.
In addition, other materials also work with this briquette machine like
charcoal, coal, etc. These materials ought to be well mixed with the binder to
get the briquette shape.
Hydraulic type briquette machine works with a hydraulic
pump station that supplies a very giant pressure. Due to its high pressure,
approximately all the materials can be briquette with this system. Metal, as a
raw material that replicates flexibility under high pressure, is especially
appropriate to be briquette by the hydraulic type of briquette machine. The
briquette working procedure is in a hollow where materials are fed into; their
materials are briquette under a very elevated force. The plasticity of
hydraulic type of machine is the reason and makes them binding steadily jointly
as a block.
The piston type utilizes the thrust of the hydraulic
cylinder to reciprocate the piston (also known as a plunger) or the rotary
power of the mechanical device, and the piston drives the ram to respond in the
forming sleeve to produce a pressing force to shape the material to briquette.
A giant pressure will be produced as the progress of the flywheel and strike
the briquette again and again after a short time; it increases the temperature of
the raw material. As the raw material is in motion, it fractionates with the in
the interior, another type of heat – friction heat creates. Material raises its
own temperature to a high level and melts the lignin with the action of these
two kinds of heat. Particle materials then bind jointly and become well-built
as much as necessary.
The roller press machine works with two close revolving
rollers with conflicting direction at the equivalent speed. The two rollers
have holes on the surface with the same width and diameter. The similar two
holes on the diverse roller will match at the meeting point of the midline and
the briquette will be pushed when they move. Roller press can be designed for
numerous types with different pressure requirement. A usual roller press will
utilize a blocked iron to fix the changeable roller as it works on low
pressure. The hydraulic pump station is also can be applied to fix the roller
and provide a much bigger but flexible hold to the roller to work steadily on giant
pressure.
These are the types and making process of briquetting
machines that work on different pressure for different materials. If you want
to purchase a briquetting press machine, you can
check of specification of that machine by visiting ecostan. Tell us by dropping
a comment in the comment section which type of briquette machine you like most.
