Everyone knows that biomass
briquette machines are used to briquette the biomass materials into round,
square, rod, cylindrical, oval type, etc without any binders by high
temperature and high pressure. If you use it then it is your responsibility to
keep maintenance of the briquette machine. Its cleaning and maintenance
should be not only from outside but from inside too. Before that, you need to
know about some procedures for the maintenance of the briquette machine. Here I
will briefly introduce them and wish they are supportive to you.
Anti-rust procedures
Maybe, the working condition of
the briquette machine is not very fine. The water and snow may perhaps break
into the machine and its consequence has been damaged. Therefore, you can take
some action. Such as, you can use the acid to do a chemical reaction with the
rust. In this manner will remove the corrosion products of the surface of the
briquette machine. It always functions in the workshop. On the briquette
machine’s surface, you can paint anti-oxidation material such as mineral oil,
paint, and enamel to prevent rust. These materials will prevent the machine
contact with the water and air.
Wearing parts maintenance
according to diverse seasons
When seasons are different, the
maintenance procedures also will be unlike. You need to follow dissimilar
procedures to maintenance parts. You should increase the lubrication time to
avoid propeller heating because the spring and autumn belong to the dry
climate. To protect different spare parts, you should choose different
lubricating oils. For good machine performance, you need to apply oil on the
different parts of the machine after every 2 months. You should prepare for
moisture-proof work, reduce quick-wear part rust for winter and summer seasons,
the winter weather is snowy and cold and summer weather is rainy. Must have
complete cold-proof and freeze proof work.
Condition shows the machine
meet the end of life
If the briquette machine is
working for a long time, obviously it may have many damages. And we think it
will be scraped but we need to repair the briquette making machine and
need to update the device. There is a groove and black spot or its inner
circular surface wear on the surface of the hollow shaft, consequently the
hollow shaft will be variant and flaw. The briquette machine’s gear edge
deformation should not be greater than 7.5 mm. Bearing wear is larger than 1/3
of its thickness. These are some updates that you should do; maintenance of the
briquette machine needs these repairs after working for a long time.
Final words
These all are maintenance tips
of the briquette machine. You should follow them and must have done extra
efforts such that, do tight screws of the machine. When briquetting machine
manufacturers are making machines, their focus is always on the parts of
the machines. If you want to get more information about the maintenance of the
briquette machine then you can ask us in the comment section. We will surely
give answers to your questions and it can be that we write a new blog about
more new maintenance tips for briquette machines.
Read More:-All About Main Parts Of Rotary Drum Dryer
No comments:
Post a Comment