How Machines Can Ease Your Pain

People in the olden days used to put a lot of effort into cutting down the woods and moving from place to place to sell them. Many people even lost their lives in doing this work. This work has stopped with the use of high technology machines. The working advanced specialization has discovered a lot of things in today's world. One of them is the White Coal project. Everyone knows how essential coal is today. So, this method can help us bring white coal in natural ways. This is obtained in the form of fuel with the help of chopped dried wood and burning it.

 Paddy Straw Grinder

The paddy straw is available in a wide range. These paddy straws are collected and released in some of the farms. These farms are difficult to handle and transport this amount of raw material and maintain them. The top working plants usually sit idle for weeks, taking the best care of the fields before it dries. Looking towards the way the processing system, the paddy straws are first compressed into tiny pellets and further using this output for refining it to powdered form which is further used for many useful things. The dust would contain a lot of secret energy in its size and weight and then transported for economical use.

 

The high and advanced upbringing to startup a Paddy straw grinder is designed for every desired capacity depending on the farmer's yields. The plan is to turn farmers with a fruitful profit on their farms or later selling to it nearby farms. To quick and surprise transport the paddy straws into nearby Biomass Plants is another clever challenge where farmers do not feel highly incentivized, and plenty of the paddy straws are burnt due to the distance of biomass plants from the farming area and transporting it is expensive.

 

Hammer mill

The best machine is used for slicing off the large pieces of wood into smaller ones in the required size. The Hammer mill is a large drum with a horizontal rotating shaft in it. The hammer is allowed to swing freely in the drum with center attachment. This size reduction technique is done in this metal container. It slices the whole content in just a few seconds. A small screen is fixed at the bottom of the machine, allowing the properly sized output to pass out.

Get your desired machines at Ecostan, the top leading company in these machines. Our experts take the best care while designing your special machine. Check out now!!

 

 

 

 

 

 

 

 

 

 

How to Improve The Biomass Briquette Quality

Biomass briquette is a type of renewable briquette which is much in demand in recent years and, there are many factors that can affect the biomass briquette quality. By using the useful tips given in this article, you will be able to improve biomass briquette quality. Numerous factors will influence the biomass briquette. There are divided into two parts. The first part is –internal part and the second part is the external part. Its internal part mainly contains raw material. While the external part includes the heating temperature, pressure, and the size of the raw material. If you want to know about tips on biomass briquette quality and the working process of Briquette Machine, this article is for you.

 

The heating temperature

The heating temperature has a great impact on the briquette density and strength. For the same raw materials with certain moisture, the necessary briquetting pressure will be lower in high temperatures. As you know, biomass briquette is typically a binder-free wat as we are the internal binder lignin. Around temperature 70 to 100 degrees Celsius, the lignin will become soft. When the temperature will rise, the binding affection will become better. The lignin starts melting when the temperature is reached at 160 degrees Celsius. And it turns into a gel that makes the binding effect much strong

 

The briquette pressure

In the biomass briquette making process, pressure is regarded as the most important factor. This briquette process is divided into three steps. The first step is soft briquetting-the second is transition briquetting, and stable briquetting. As the pressure is low in the first two steps and the density will increase quickly when the pressure is increased. While in the third step, the density will increase slowly along with the pressure.

 

The briquette and pressure keeping time

The pressure has its own effect on the quality of briquette when it`s small while it affects little when it`s big. It has been seen that the quality of affection can be ignored if the pressure-keeping time is more than 40 seconds. On the other side if the pressure keeping time is more than 20 seconds, an extra 10 seconds on pressure keeping the briquette density by 5%.

 

 

Raw material type

In different briquette methods, different kind of raw material is needed. Some raw material such as wood type, straw, etc. is good to briquette with the heating system. As the lignin create a well performance on the high temperature which highly enhancements the plasticity.

 

The moisture of the raw material

The density relaxation and burning effect of the biomass briquette are affected by moisture. Raw material with appropriate moisture will get an ideal briquette effect. Suitable moisture will help to pass pressure on the particle and a well lubricating. But the biomass that we get has moisture around 20-40%. The first part of the briquette energy will cost extra and useless moisture when briquette with high moisture. The raw material having low moisture is not suitable for lignin plasticization.

 

 

Crushed size of the raw material

The quality metrics of the biomass briquette are affected by crushed size-fall resistanceand density relaxation. When the raw material is introduced in a certain type of briquette machine, the size of the raw material must be smaller than the mould briquette output whole size. The raw material which is unsuitable in size, especially different in size and shape and will make the briquette with crack. The raw material will affect the strength of the biomass briquette. When the raw material is big, it will decrease the effectiveness of the briquette machine and also upturn the power consumption.

 

The Final word

These days biomass briquette making has become more popular with the development of renewable energy. This is all about Biomass Briquette Machine and tips to improve biomass briquette quality. Biomass waste recycles plant helps to make a good profit and also protection for the world`s environment today and onwards. 

 

 

Guidance To Choose The Right Type Of Hammer Mill Grinder

If you want to purchase a hammer mill grinder and you don't have sufficient knowledge about this machine, it is necessary to know all about the hammer mill grinder before purchasing it. Because it can be risky for you in the future if you purchase a hammer mill without knowing about it. So, before buying the hammer mill grinder, you ought to have enough knowledge about it so that you can choose the right kind of hammer mill grinder. So, in this blog, we will guide you on how you can select the right type of hammer mill grinder:

 

Production capacity:

In general, when you go to the market to purchase a hammer mill, you will notice a nameplate and instructions of the capacity rating on the machine. So, you should be clear how much your requirement related to the production capacity of raw materials before purchasing the hammer mill grinder. If you choose the production capacity of the hammer mill more than your requirement, you need to spend more money on the hammer mill. So, purchase a hammer mill according to your requirement. 

 

About crushing the raw materials:

Before purchasing the hammer mill grinder, you should be clear in your mind that which raw materials you want to crush. So, if you want to crush grain feed, then you ought to pick a hammer mill with the feed hopper on the top. Besides, you can select the disc mills if you want to crush the bran and wheat cereals. Apart from this, you can purchase a tangential feeding hammer mill to crush dissimilar types of materials, such as crop straw and grains. 

 

Power of the hammer mill grinder:

When you go to the market to purchase a hammer mill, you will notice the rated power of the electric motor on a nameplate of a hammer mill grinder. The electric power will be in a certain range. If you want to grind different types of raw materials in a hammer mill grinder, you need a powerful hammer mill grinder that varies on different kinds of raw materials. Basically, if you are crushing the corns with a 1.2mm screen mesh, the output per kilowatt per hour should not be less than 48 kg. So, you should pay attention to this thing while purchasing the hammer mill grinder. 

 

How much noise and dust produce the hammer mill?

Several different types of indigenous hammer mill grinders are available in the market that produced high sound. When a hammer mill grinder produces dust in a large amount and generates noise, sometimes, you can’t work in that type of working environment. So, you ought to choose the hammer mill that produces less dust without generating high noise.

 

Final words

If you purchase a hammer mill grinder without collecting enough information, it can be risky for you in the future and maybe wastage of your money. So, you should pay attention to the above-written points during purchasing the hammer mill grinder that will help you to choose the right type of hammer mill grinder. Besides, if you want to read more about the hammer mill grinder, leave your comments in the comment section. 

Read More:-Making Of Sawdust From Wood Log

 

 

Tips for using chipper shredder

 

We spent a lot of time dealing with leaves since removing the leaves from the lawn and collecting them to getting their final resting place engages a series of machines. Most people using their lawn tractor to collect the leaves from the lawn and after that run them over to the chipper-shredder, run them through that, and then put them into the compost bin. Here are a few tips that in this article we will share with you that will helpful for you:

 

1. A little bit at a time

Chipper-shredders have a lot of safety features built into them, which is a great thing. Practically the merely methods that you can get yourself in trouble are sticking your hands into the machine, which is not an easy task to do, or not wearing an eye guard in case something comes flying out of it towards your eyes. But one sure approach to block the entire program up is to try to put surplus through it at one time. Nothing gets sucked through the hopper if you put too many leaves in the hopper at one point, so to clear it you either have to turn off the machine, start over or start poking around with a big stick and pull everything out. Better you immediately prevent any of it by putting in little amounts of material at one time. It meant that instead of removing the whole collection bag from the mower into the hopper, I would slowly pour it out. It will take a little more time but it is much faster than frequently stopping to clear the block.

 

2. Drier is better

Persons that are working on leaf collection project first thing in the morning when the leaves are still covered in dew so they get wet. They just put the material in the machine and after that the more probably the machine is to block and the smaller the amount they put in at one time required to be. When they figured it, then out things get smoothly, but ahead of further review, they have saved much time if they just wait for the sun to dry everything off before started putting material through the shredder. The same thing is applied to other garden waste materials. People also put through most of what they cut out of the garden. It is harder than other plant stuff that doesn’t drop to the bottom of the hopper easily as leaves, but some people get around that by doing some planned loading. Little bundles at a time are required.

 

3. Respect size limits

The most chipper shredder can crush branches up to 3 inches in diameter and it does a good job with it. In fact, more branches ought to put through it since it makes the best mulch. Human beings put a branch that is most likely only 1.5 to 2 inches in diameter in it and it eats it all up until it gets to a large knot, or perhaps where it has connected to another branch, which is larger than 3 inches and it blocked it up good. Of course, it means stopping the entire thing, ensuring that all the components are finished rotating, and after that going in there to pull it out, which is not an easy task.

 

Final words

These are the tips for using a chipper shredder that will helpful for you during grinding the stuff. If you want to know something more about chipper shredder machines, leave a comment in the comment section and tell us what you want to read in the upcoming blog or article. We will provide an article or blog that will cover your questions. 

 

Hammer Mill: Grinder

 

Hammer Mill: Grinder

 

Appropriate a selection of the operating guidelines for a hammer mill can maximize expertise and enhance the uniforms of the product obtained:

 

Material to be ground:

Raw materials act differently when they are grounded; the factors that have the greatest influence on milling properties are toughness and flexibility. A rise of moisture in the product disturbs these two specifications and step up them. Analytically, 1% of the increase in humidity means 7% of more power to achieve the same result.

 

With indistinguishable product moisture measure and continual machine settings, the following circumstantial bond can be accepted for grain:

Mixture ratio: 

Oats: Barley: Wheat: Corn 

1     : 2         : 3         : 4

 

Peripheral speed:

Each product has its own gilt-edge milling speed. With increasing tangential speed, the granulation becomes first-rate. However, power demands will rise, while the thorough-paced will decrease.

 

The below sum up these rates in m/sec:

 

Millet (baajara)                     48 m/sec

 

Maize (makka)                    52 m/sec

 

Wheat (gehoon)                 65 m/sec

 

Rye bran (raeechokar)     75 m/sec

 

Barley (jau)                        105 m/sec

 

Bran (chokar)                    110 m/sec

 

Sieves configuration:

The sieve hammer mills are frequently driven steel sheets of 2 - 3 mm.
Density, with holes whose diameter is customarily the same to or less than the diameter of the mass. Bulkier holes mean higher open area and accordingly increased a performance altogether, decreased particular power requirements, rough product, a shorter useful lifespan of the sieves. If pierce chrome is used, thicker sheet metal could be used for balance reasons. Even with else ways identical conditions in terms of the diameter of the perforations and the open sieve area, this opportunity can make the motion of the lesser medium through the sieve more difficult, hence: the interrupt the achievement would fall; the product would become excellent; the specific ability requirement would get bigger.

In sieves, the supervision of perforation is generally aligned with the more significant preference of linen. Backpedal perforation must be specifically requested

Boost your workflow with Ecostan HammerMill, check its Advanced Technology features as:

Hammer Mill Machinery with Cyclone:

Model No	Production	Required Power
HM 120	upto 7000 KG/HR	199.5 HP
HM 100	upto 5000 KG/HR	151 HP
HM 60	upto  3000 KG/HR	84 HP
HM 50	upto  2000 KG/HR	65 HP
HM 40	upto  1300 KG/HR	52.5 HP
HM 20	upto  600 KG/HR	28 HP
HM 10	upto  250 KG/HR	15 HP

 

Types and making process of a briquette machine

 

Briquetting Press

Before moving ahead in this article, first of all, you need to know about the briquette machine. Generally, a briquettingpress machine is utilized to convert the waste material into a regular shaped briquette block that can be used as a fuel, which can assist to get better the conditions of that powder, storage, make them simple for transportation etc. The briquette system can deal with all types of materials with suitable moisture and size. Besides, there are multiple types of briquette machines with dissimilar working principles that are discussed below:

 

Screw type

To press the raw material the screw type briquette machine uses the auger; it can be prepared with or without the heating system to output briquettes with different materials. The heating structure is particularly designed for those workers who deal with materials includes lignin that always originated from biomass. So the heating system is typically utilized for biomass briquetting. When briquetting gets with the screw-type briquette machine, then binders are always required. The appropriate material is fed to the hopper and after that conveyed by the screw inside the briquette machine. The rotating screw takes the material from the feed port and compressed it aligned with a die which helps to increase the pressure of a grade along the screw. Prepare with a heating system will assist the biomass material to melt the inner lignin and turn it into a high-performance binder. In addition, other materials also work with this briquette machine like charcoal, coal, etc. These materials ought to be well mixed with the binder to get the briquette shape.

 

Hydraulic type

Hydraulic type briquette machine works with a hydraulic pump station that supplies a very giant pressure. Due to its high pressure, approximately all the materials can be briquette with this system. Metal, as a raw material that replicates flexibility under high pressure, is especially appropriate to be briquette by the hydraulic type of briquette machine. The briquette working procedure is in a hollow where materials are fed into; their materials are briquette under a very elevated force. The plasticity of hydraulic type of machine is the reason and makes them binding steadily jointly as a block.

 

Piston type

The piston type utilizes the thrust of the hydraulic cylinder to reciprocate the piston (also known as a plunger) or the rotary power of the mechanical device, and the piston drives the ram to respond in the forming sleeve to produce a pressing force to shape the material to briquette. A giant pressure will be produced as the progress of the flywheel and strike the briquette again and again after a short time; it increases the temperature of the raw material. As the raw material is in motion, it fractionates with the in the interior, another type of heat – friction heat creates. Material raises its own temperature to a high level and melts the lignin with the action of these two kinds of heat. Particle materials then bind jointly and become well-built as much as necessary.

 

Roller Type

The roller press machine works with two close revolving rollers with conflicting direction at the equivalent speed. The two rollers have holes on the surface with the same width and diameter. The similar two holes on the diverse roller will match at the meeting point of the midline and the briquette will be pushed when they move. Roller press can be designed for numerous types with different pressure requirement. A usual roller press will utilize a blocked iron to fix the changeable roller as it works on low pressure. The hydraulic pump station is also can be applied to fix the roller and provide a much bigger but flexible hold to the roller to work steadily on giant pressure.

 

Final words

These are the types and making process of briquetting machines that work on different pressure for different materials. If you want to purchase a briquetting press machine, you can check of specification of that machine by visiting ecostan. Tell us by dropping a comment in the comment section which type of briquette machine you like most.

 

How Moisture Affects The Biomass Briquetting Process

The biomass briquetting machine compresses a large amount of biomass raw materials into different shapes by heating and pressing techniques and this process is known as the biomass briquetting process. The irregular shape, size, and high moisture of biomass waste make it hard to transport, utilize, store, and process. Besides, there are multiple other factors that affect the procedure of biomass briquetting machines. One of the main factors is raw material moisture that affects the briquetting process. So, in this blog, we will discuss how moisture affects the biomass briquetting process:

 

Raw biowaste with low moisture:

The particles are not sufficiently extended, and the surrounding particles are not tightly bound and cannot be formed when the moisture content of the biomass material is too low. For instance, the trace moisture is vaporized at a high temperature if the moisture is too low. A recent study shows that during briquetting, biomass such as reeds and corn stalks are suitable with moisture around 12% to 18%. The density of the biofuel briquette is maximized and leftovers relatively stable over a suitable moisture range. The density of the briquette fuel starts to reduce when the moisture is increased to a certain amount. The lower moisture raw material is produced the biofuel briquette whose have the tendency to absorb moisture in the air, the reason behind it is that the biofuel briquette to deform and burst, as well as diminishing the briquette density. 

 

Raw biowaste with high moisture:

The particles can be sufficiently extended in the direction perpendicular to the maximum stress if the moisture of the raw material is too high. However, the particles can be engaged with each other because more water in the raw material is ejected and it is divided among the particles layers so that the particles are separated. Moreover, the distance among the molecules is increased, by too much water vapor and it affects heat conduction and lowers the briquetting temperature. Consequently, decrease in the bonding force. So, the heating temperature needed in the briquetting procedure is increased when the moisture content of the raw material is too high. The forming briquette is experienced in that the excessive moisture increases the radical force, which also boosts the power consumption.

 

Simultaneously, a component of the heat of the preheating matter of the biomass briquetting machine is used on the surplus water, the evaporated water is rapidly vaporized but the steam can’t be released from the molding the cylinder in time, consequently in volume expansion, simply forming a gas blockage, forming steam pressure in the longitudinal direction of the cylinder, and occupying a boost in space. The biofuel will be cracked and the surface is rough when the steam pressure is minor. The disintegration may affect the subsequent transportation and packaging because of the high-pressure water vapor inside the biofuel briquette after the biofuel briquette is ejected from the forming sleeve.

 

Final words

The effect of biofuel briquette is the consequence of a combination of a lot of factors, but moisture plays a crucial role in the formation. If you are looking for a briquetting machine, you can check the briquette machine price as well as other details by visiting ecostan that sells multiple other machines at a reasonable price. Hope you gain extreme knowledge by reading this blog. Please share your reviews with us about this information. 

 Read More:-6 Best Chipper Shredder Of 2021