Tips for Using a Chipper Shredder

 

Often, people spend a lot of time gathering leaves from their gardens. Dealing with leaves every day is not an easy task if your garden is spread over a large area. With the help of a series of machines, leaves are removed from the garden and getting them to their final place. And using a chipper shredder makes that raw material into use. But, most people are unaware of using a chipper shredder. Therefore, to provide the knowledge regarding using a chipper shredder, here, we will share some tips that will really be helpful for you:

Clear the area

You need to remove all tripping hazards and obstructions near and about the chipper shredder. You should keep the area clean around the machine and free from immediate motion and unobstructed. Turn off the machine if you seem that something is stuck inside the machine. After that, check the machine and remove the thing that is stuck inside the machine. It can reduce the threat of falling and slipping around the machine.

Minimum speed first

When you start your chipper shredder and use it, you should run it at the lowest setting. Pay attention to the sound generating from the chipper shredder machine. There may be broken or loose parts of the machine inside and, you should switch off the machine instantly if you hear any strange sounds. Since this may be the cause of any damage to your machine. 

Lighten the load

Feeding the chipper shredder a large number of leaves can boost the odds of accidents happening, damaging the system and damaging individuals. Simply load leaves that fall within the limits of your chipper shredder. Apart from this, you can feed leaves into the chipper in phases if the amount of leaves is high on your lawn.

 

Zone of safety

Before starting the machine, make sure that the area around you is clear and free from animals. Make your mind up on a safety perimeter of a minimum of ten meters in all directions around the chipper shredder machine, and also be sure that the perimeter is marked with warning devices such as cones, signs, and barricades. If you see something or somebody coming towards you, switch off the machine instantly.

 

Inspect for use

Make it a point to analyze every component of the chipper shredder before use. If you find any visible signs of damage like fractures, worn hinges, and destroyed hood latches, don’t make use of the machine. Make sure that all bolts and screws are well fixed. Assess all devices and safety controls to verify that they are in a properly working state.

 

Wear proper clothes

It becomes essential to wear short-sleeved and tight-fitting clothing while working with a chipper shredder. Make sure that your pants and shirt are wrapped in and remove everything that might create obstacles in the machine-like belts, straps, jewelry, ties, and other dangling objects. During running a chipper shredder, standard safety gear involves safety goggles, a hard hat, heavy-duty cuff-free work gloves, steel-toed boots, and ear protection.

 

Final words

Listed above are some of the best tips that you should follow while using a chipper shredder. I hope, these tips will be helpful for you as a chipper shredder user. At last, if you have any questions regarding this article, leave a comment in the comment section; we will surely answer your questions. Also, know about How Machines Can Ease Your Pain

 

How Does A Briquette Machine Work – Types And Making Process

In the world of technology, there are many types of briquette machines available with different working principles. And they work on different pressures and temperatures for different materials.The briquette system can deal with all types of materials with appropriate size and moisture. Briquetting work always with the ring binder as it requires the binding effect to get sufficient power and strength for the completed briquette. In this blog, you will know all about the Briquette machine and its types with the working process. 

 What is a briquette machine?

It is a machine that turns waste material into hollow fuel briquette at high pressure. These briquettes are either charcoal or wooden blocks. This machine is used to convert the waste powder into a regular shape block, which can help to progress the situations for those powders.Both biomass and industrial waste are different from each other because of their binder source. 

 Types of briquette machines and how they work

Screw type

To press the raw material, a screw-type briquette machine is used with different materials and can be equipped with or without the heating system to output the briquette. The heating system is like a distinctive design for those briquettes that deal with materials that contain lignin. Screw type briquette machine is used with different materials to press the raw material. First of all, suitable materials are fed to the hopper and then converted by the screw inside the briquette. Material is taken from the fed port by rotating screw and compacts it against a die which assists the build-up of a pressure gradient along the screw.

Hydraulic type

A type of hydraulic work with a hydraulic station supplies great pressure. Almost all the materials can be briquette with this system because of its high pressure. Its working process is in the chamber where materials are fed into and materials are at high pressure. It affects their plasticity and makes them binding stably together as a block. 

 

Piston type

The piston-type briquette machine uses the rotary power of the mechanical device. And the piston drives the ram to return in the forming protective cover in order to generate a pressure forcing to form the material to briquette. A large pressure will be generated with the movement of the flywheel and punch the briquette in a short time. Materials raise their temperature to a high level and melt lignin with the action of these two types of heat. 

The Final word

This is all about briquetting machine and their whole procedure. After reading this blog, you will get an idea that how these machines working on different pressure and temperature. Hopefully, the information shared through this blog will be more helpful for you regarding the briquetting machine. Thanks! 

 

6 Common Problems In The Operation Of Briquette Machine

Briquette machine is used for making briquettes from waste materials and human beings can make use of these briquettes as fuel. However, there are a lot of benefits of briquetting machine such as it reduces the chances of pollution because instead of burning waste material, human beings can reuse them. But, during the operating of briquette machine some common problems occur that are described following:

 

It always makes noise:

The reason behind it is the water content and the temperature in the waste material are out of the normal range. And the only solution is drying waste material by the dryer to make sure that the materials are kept at proper humidity and temperature. The damaged components of the briquette machine are the reason of makes noise. So, you ought to replace them immediately.

 

It restarts frequently:

Replicate restart of the briquette machine is normally caused by the low power supply that can’t drive the machine to work usually. It would better suit the remedy to the case to solve this issue. Initially, the AVO meter detects the power supply voltage of the briquette machine. It is better detected under the situation that the machine is loaded so that to judge whether there is any power supply difficulty.

 

The oil pressure of briquette machine is inadequate:

There is inadequate oil pressure while the running procedure of the briquette machine. The reason is causing such a concern might be the deformation of the joint gasket and the blockage of oil suction. It ought to be washed and cleaned immediately to make sure the cleanness of briquette machine equipment if the oil suction is blocked. It ought to be replaced the deformed gasket with a new one if the joint gasket is deformed so that the machine can work efficiently and normally.

 

Water resistance of briquette machine:

The suspension installation way is adopted by a lot of users while the installation of the briquette machine. But there is still a gap between the bracket hinge and the briquette machine. It is snowing or raining, the water can leak into the machine that is the reason for the damage. Thus, the waterproofing measure ought to be adopted while installation. 

 

The deformation of completed products:

Occasionally, after shaped, the completed products are deformed by the entire procedure and the reason behind it is that the waste materials hold a large amount of water. It can reduce the water content in the waste materials to solve this issue. Through the dryer, the waste material can be dried. 

 

The briquette machine produces a large amount of dust:

The cyclone dust collector can be equipped as the corollary equipment if the machine generates a large amount of dust while the briquetting procedure. In the briquette machine, the dust collector has the benefit of enhancing the working efficiency greatly and cleaning the dust immediately. 

 

Final words:

The above-discussed points are described the common issues in the operation of the briquette machine. The improper operation may decrease the working efficiency of the briquette machine while generating the briquettes. If you like this informative blog, please share it with your contacts.

 

Working Principle And Features Of Sawdust Briquette Making Machine

A sawdust briquette machine is used to compress the waste material under high temperature and high pressure so that the briquette can be made from that compressed waste material. Initially, the large screws of the machine grind the waste material and convert it into briquettes. During the process, naturally, the lignin content is liberated under high temperature and pressure. In the briquetting process, the lignin works as the glue that is used to bind and compress the biomass to convert it into high-density briquettes. After that, the clean and green briquette is formed to use as fuel. Besides, here are the features of the sawdust making machine:

 

Long life and screw shaft:

The briquette machine made of durable material and the shaft is also made of durable material. When a screw shaft is manufactured with a milling machine, the distance between each screw and the angle of each screw is the same that never create a problem in the future. And the high hardness alloy steel is used to manufacture the screw shaft.

 

Long life of inner sleeve:

The duration of the inner sleeve using is one to two years. In the past, the whole steel bar is used to make the inner sleeve throughout the water jet cutting system so that the inner face gets smooth. So, it produced the briquettes easily and helps to save energy. That is the reason why the completed sawdust briquettes are smooth that you often feel by touching them. There are two components in the inner sleeve. And whenever one of them will damage, then you need to just change the major component.

 

Heating device and lubricating system:

Heating device: The sawdust briquette machine consists of two heat collars and the thick copper wires are used to make it and inside the machine a ceramic is present. Lubricating system: with the lubricating system, the gear box is also outfitted. Apart from this, by using an exhaust function, the briquette machine is designed, that assist to sustain consistent air pressure.  

 

Auto cutting system:

When a briquette is manufactured, then the prepared briquette is automatically cut in equal lengths, which is the great feature of a briquette machine. And briquettes can be easily stored in a warehouse.

 

Final words:

By reading the above-written points, you must have understood the working principle of the briquette machine and know about the features of the briquette making machine. If you want to read more about the briquette machine, drop a comment in the comment section. In the future, we will provide you more blogs related to sawdust machine.

 

How Machines Can Ease Your Pain

People in the olden days used to put a lot of effort into cutting down the woods and moving from place to place to sell them. Many people even lost their lives in doing this work. This work has stopped with the use of high technology machines. The working advanced specialization has discovered a lot of things in today's world. One of them is the White Coal project. Everyone knows how essential coal is today. So, this method can help us bring white coal in natural ways. This is obtained in the form of fuel with the help of chopped dried wood and burning it.

 Paddy Straw Grinder

The paddy straw is available in a wide range. These paddy straws are collected and released in some of the farms. These farms are difficult to handle and transport this amount of raw material and maintain them. The top working plants usually sit idle for weeks, taking the best care of the fields before it dries. Looking towards the way the processing system, the paddy straws are first compressed into tiny pellets and further using this output for refining it to powdered form which is further used for many useful things. The dust would contain a lot of secret energy in its size and weight and then transported for economical use.

 

The high and advanced upbringing to startup a Paddy straw grinder is designed for every desired capacity depending on the farmer's yields. The plan is to turn farmers with a fruitful profit on their farms or later selling to it nearby farms. To quick and surprise transport the paddy straws into nearby Biomass Plants is another clever challenge where farmers do not feel highly incentivized, and plenty of the paddy straws are burnt due to the distance of biomass plants from the farming area and transporting it is expensive.

 

Hammer mill

The best machine is used for slicing off the large pieces of wood into smaller ones in the required size. The Hammer mill is a large drum with a horizontal rotating shaft in it. The hammer is allowed to swing freely in the drum with center attachment. This size reduction technique is done in this metal container. It slices the whole content in just a few seconds. A small screen is fixed at the bottom of the machine, allowing the properly sized output to pass out.

Get your desired machines at Ecostan, the top leading company in these machines. Our experts take the best care while designing your special machine. Check out now!!

 

 

 

 

 

 

 

 

 

 

How to Improve The Biomass Briquette Quality

Biomass briquette is a type of renewable briquette which is much in demand in recent years and, there are many factors that can affect the biomass briquette quality. By using the useful tips given in this article, you will be able to improve biomass briquette quality. Numerous factors will influence the biomass briquette. There are divided into two parts. The first part is –internal part and the second part is the external part. Its internal part mainly contains raw material. While the external part includes the heating temperature, pressure, and the size of the raw material. If you want to know about tips on biomass briquette quality and the working process of Briquette Machine, this article is for you.

 

The heating temperature

The heating temperature has a great impact on the briquette density and strength. For the same raw materials with certain moisture, the necessary briquetting pressure will be lower in high temperatures. As you know, biomass briquette is typically a binder-free wat as we are the internal binder lignin. Around temperature 70 to 100 degrees Celsius, the lignin will become soft. When the temperature will rise, the binding affection will become better. The lignin starts melting when the temperature is reached at 160 degrees Celsius. And it turns into a gel that makes the binding effect much strong

 

The briquette pressure

In the biomass briquette making process, pressure is regarded as the most important factor. This briquette process is divided into three steps. The first step is soft briquetting-the second is transition briquetting, and stable briquetting. As the pressure is low in the first two steps and the density will increase quickly when the pressure is increased. While in the third step, the density will increase slowly along with the pressure.

 

The briquette and pressure keeping time

The pressure has its own effect on the quality of briquette when it`s small while it affects little when it`s big. It has been seen that the quality of affection can be ignored if the pressure-keeping time is more than 40 seconds. On the other side if the pressure keeping time is more than 20 seconds, an extra 10 seconds on pressure keeping the briquette density by 5%.

 

 

Raw material type

In different briquette methods, different kind of raw material is needed. Some raw material such as wood type, straw, etc. is good to briquette with the heating system. As the lignin create a well performance on the high temperature which highly enhancements the plasticity.

 

The moisture of the raw material

The density relaxation and burning effect of the biomass briquette are affected by moisture. Raw material with appropriate moisture will get an ideal briquette effect. Suitable moisture will help to pass pressure on the particle and a well lubricating. But the biomass that we get has moisture around 20-40%. The first part of the briquette energy will cost extra and useless moisture when briquette with high moisture. The raw material having low moisture is not suitable for lignin plasticization.

 

 

Crushed size of the raw material

The quality metrics of the biomass briquette are affected by crushed size-fall resistanceand density relaxation. When the raw material is introduced in a certain type of briquette machine, the size of the raw material must be smaller than the mould briquette output whole size. The raw material which is unsuitable in size, especially different in size and shape and will make the briquette with crack. The raw material will affect the strength of the biomass briquette. When the raw material is big, it will decrease the effectiveness of the briquette machine and also upturn the power consumption.

 

The Final word

These days biomass briquette making has become more popular with the development of renewable energy. This is all about Biomass Briquette Machine and tips to improve biomass briquette quality. Biomass waste recycles plant helps to make a good profit and also protection for the world`s environment today and onwards. 

 

 

Guidance To Choose The Right Type Of Hammer Mill Grinder

If you want to purchase a hammer mill grinder and you don't have sufficient knowledge about this machine, it is necessary to know all about the hammer mill grinder before purchasing it. Because it can be risky for you in the future if you purchase a hammer mill without knowing about it. So, before buying the hammer mill grinder, you ought to have enough knowledge about it so that you can choose the right kind of hammer mill grinder. So, in this blog, we will guide you on how you can select the right type of hammer mill grinder:

 

Production capacity:

In general, when you go to the market to purchase a hammer mill, you will notice a nameplate and instructions of the capacity rating on the machine. So, you should be clear how much your requirement related to the production capacity of raw materials before purchasing the hammer mill grinder. If you choose the production capacity of the hammer mill more than your requirement, you need to spend more money on the hammer mill. So, purchase a hammer mill according to your requirement. 

 

About crushing the raw materials:

Before purchasing the hammer mill grinder, you should be clear in your mind that which raw materials you want to crush. So, if you want to crush grain feed, then you ought to pick a hammer mill with the feed hopper on the top. Besides, you can select the disc mills if you want to crush the bran and wheat cereals. Apart from this, you can purchase a tangential feeding hammer mill to crush dissimilar types of materials, such as crop straw and grains. 

 

Power of the hammer mill grinder:

When you go to the market to purchase a hammer mill, you will notice the rated power of the electric motor on a nameplate of a hammer mill grinder. The electric power will be in a certain range. If you want to grind different types of raw materials in a hammer mill grinder, you need a powerful hammer mill grinder that varies on different kinds of raw materials. Basically, if you are crushing the corns with a 1.2mm screen mesh, the output per kilowatt per hour should not be less than 48 kg. So, you should pay attention to this thing while purchasing the hammer mill grinder. 

 

How much noise and dust produce the hammer mill?

Several different types of indigenous hammer mill grinders are available in the market that produced high sound. When a hammer mill grinder produces dust in a large amount and generates noise, sometimes, you can’t work in that type of working environment. So, you ought to choose the hammer mill that produces less dust without generating high noise.

 

Final words

If you purchase a hammer mill grinder without collecting enough information, it can be risky for you in the future and maybe wastage of your money. So, you should pay attention to the above-written points during purchasing the hammer mill grinder that will help you to choose the right type of hammer mill grinder. Besides, if you want to read more about the hammer mill grinder, leave your comments in the comment section. 

Read More:-Making Of Sawdust From Wood Log