General Issues Faced In Operating Briquette Machine

 

The briquette machine is also known as a briquetting machine used to squeeze the hard material. It has the benefits of high molding pressure, flexible rotational cycle, and a screw conveyor. It can be divided into several types of briquette machines according to the materials, such as charcoal briquette machine, coal briquette machine, powder briquette-machine,gypsum briquette-machine,rotary dryer,etc.It can also be classified into different briquette machine types according to their functions, such as ordinary briquette machine, hydraulic briquette machine, strong hydraulic briquette machine, etc. The briquette machine is essential for the whole briquette production line. Therefore, what obstacles will be occurred in the operation method?

 

Here are some of the common problems that will be occurred in the operation process and how to solve these problems to improve the work efficiency and capacity of the briquetting-machine. 

 

Machine is Noisy 

 

Under this condition, the water content temperature in the raw material is out of the normal range. The dryer's corresponding solution is drying material to ensure that the materials are kept at the proper temperature and humidity. 

 

Another reason is that there are damages with the briquette machine parts, such as the screw conveyor is worn seriously. When it happens, the parts of the briquette machine should be replaced immediately.

 

 

 Restarts Repeatedly 

 

Repeat restart of the briquette machine is generally caused by the low power supply, which cannot drive the briquette to work finely.To solve this problem, it better suits the remedy to the case. 

 

First, the power supply voltage of the briquette machine is detected by meter. It’d better detect under the condition that the briquette machine is loaded so that there is any power supply issue. 

 

Oil pressure is insufficient.  

There is inadequate oil pressure during the working method of the briquette machine.The reason causing such a problem may be the blockage of the oil suction or the joint gasket deformation. 

 

If the oil suction is blocked, it should be cleaned and washed immediately to ensure the cleanness of the briquette machine equipment; if the joint deformed should be replaced the deformed gasket with a new one the briquette machine can work normally and efficiently. 

 

Water-resistance

 

During the installation process of the briquette machine. Several users adopt the suspension in the installation method, but there is still a gap between the briquette machine and the bracket hinge machine. It is raining or snowing, and the water may penetrate the briquette machine to cause damage. So that waterproofing measures should be adopted during the installation process. 

 

The above mentioned are the issues while operating a briquetting-machine, and it is also faced in a chipper grinder.  

                                            

For more detail visit Buying Guide For Hammer Mill Grinder